Xiaomi Mi Mix 3 5G Screen Replacement

⚡Do you have a damaged or shattered screen on your Xiaomi Mi Mix 3 5G?

The Xiaomi Mi Mix 3 5G is a smartphone that was launched in 2019 as a 5G version of the Xiaomi Mi Mix 3, which came out in 2018. The Xiaomi Mi Mix 3 5G has some features that are similar to the original model, but also some that are different. The Xiaomi Mi Mix 3 5G has a slider design that allows you to slide the screen down to reveal the front cameras and the earpiece. The slider can be triggered by pushing the screen down or by using gestures. The slider also lets you customize its functions, such as launching apps, answering calls, or taking selfies.

The Xiaomi Mi Mix 3 5G has a 6.39-inch Super AMOLED display that gives you a brilliant visual experience. The display has a resolution of 1080 x 2340 pixels and is protected by Corning Gorilla Glass 5. The display has a high screen-to-body ratio of 85%, which means it has very thin bezels and no notch. The display also supports HDR and has a 19.5:9 aspect ratio. The Xiaomi Mi Mix 3 5G has a Qualcomm Snapdragon 855 chipset that provides fast and smooth performance. It has either 6GB or 8GB of RAM and either 64GB or 128GB of internal storage. It runs on Android 9.0 Pie with MIUI 12 as the user interface. The Xiaomi Mi Mix 3 5G has a dual-camera setup on both the back and the front. The rear cameras are both 12MP, one with a wide-angle lens and one with a telephoto lens. They have features such as dual pixel autofocus, 4-axis optical image stabilization, LED flash, HDR, panorama, and night mode . The rear cameras can record videos in 4K at 60fps, or in slow motion at 960fps. The front cameras are also dual, with a 24MP main camera and a 2MP depth sensor. They have features such as LED flash, HDR, and face unlock . The front cameras can record videos in 1080p at 30fps.

The Xiaomi Mi Mix 3 5G has a fingerprint scanner on the back for security. It also has other sensors such as accelerometer, gyro, compass, and virtual proximity sensing. It has a dual SIM slot, NFC, infrared port, USB Type-C port, stereo speakers, and FM radio. It does not have a 3.5mm headphone jack or a microSD card slot. The Xiaomi Mi Mix 3 5G has a non-removable Li-Po battery with a capacity of 3800 mAh. It supports fast charging with an 18W charger included in the box . It also supports wireless charging with a 10W charger also included in the box . The Xiaomi Mi Mix 3 5G is available in four colors: Jade Green, Sapphire Blue, Onyx Black, and Forbidden City Blue. The Forbidden City Blue is a special edition that has a gold-plated dragon and phoenix design on the back and comes with 10GB of RAM and 256GB of storage.

In February 2019, Xiaomi announced the Mi Mix 3 5G variant that has a Snapdragon 855 chipset and a X50 modem for faster internet speeds. The Mi Mix 3 5G is scheduled for a May release.

The Xiaomi Mi Mix 3 5G is a smartphone that offers a unique design, a stunning display, a powerful performance, and good cameras. It is suitable for users who want to experience the benefits of 5G technology and enjoy a full-screen view without any interruptions. However, it also has some drawbacks, such as the battery life, the lack of water resistance, and the outdated Android version.

🛠️Replacing the Screen of a Xiaomi Mi Mix 3 5G in Sydney CBD Repair Centre

If you own a Xiaomi Mi Mix 3 5G and have unfortunately damaged the screen, don't worry! This detailed guide will walk you through the process of replacing the screen step-by-step. It is essential to use genuine parts for a high-quality repair to ensure an optimal user experience. We highly recommend the Sydney CBD Repair Centre for your screen replacement needs, a reputable service center in Sydney known for its quality repairs and customer satisfaction. Before we begin, it's worth noting that replacing the screen does not affect the functionality of the fingerprint scanner. Your old fingerprint scanner will work seamlessly on the new screen, allowing you to continue enjoying the convenient biometric security features of the Xiaomi Mi Mix 3 5G.

Step-by-step Guide:

(Note: To ensure a successful screen replacement, it is recommended to have a clean and organized workspace with proper tools)

Step 1: Gather the necessary tools
- A genuine Xiaomi Mi Mix 3 5G screen replacement (ensure it is compatible with the device model and comes with required adhesive)
- A repair toolkit including screwdrivers, a pry tool, tweezers, a heating pad or hairdryer, and a suction cup.
- Opening picks or guitar picks.
- A microfiber cloth for cleaning.

Step 2: Power off the device and remove the SIM card tray
- Power off the Xiaomi Mi Mix 3 5G.
- Use a SIM tray ejector tool to remove the SIM card tray.

Step 3: Remove the back cover
- Heat the back cover with a heating pad or hairdryer to soften the adhesive.
- Insert a pry tool gently between the back cover and the frame, then proceed to pop the back cover off.
- Apply uniform heat and continue prying along the edges until the back cover is completely separated.

Step 4: Disconnect the battery
- Locate the battery connector and use a screwdriver to remove the screws holding it in place.
- Carefully disconnect the battery connector from the motherboard to prevent any accidental damage.

Step 5: Remove the motherboard shield and disconnect flexible cables
- Locate the motherboard shield and remove the screws holding it.
- Lift the shield gently, exposing the motherboard underneath.
- Locate the flat cables connecting the screen to the motherboard and carefully disconnect them using a pry tool or tweezers.

Step 6: Remove the damaged screen
- Use a heating pad or a hairdryer to warm the edges of the screen to soften the adhesive.
- Place a suction cup on the screen, apply gentle pressure, and lift it slightly as a starting point.
- Insert a pry tool or guitar pick between the screen and the frame, then proceed to separate the screen from the frame.
- Slowly work your way around the edges, applying heat if necessary, until the screen is completely detached.

Step 7: Install the new screen
- Clean the frame and remove any leftover adhesive or debris using a microfiber cloth.
- Peel off the adhesive backing from the new screen and align it with the frame.
- Gently press down on the screen to ensure proper adhesion.

Step 8: Reassemble the device
- Begin by reconnecting the flexible cables between the screen and the motherboard.
- Place the motherboard shield back in position and secure it with the screws.
- Reconnect the battery and secure it with the screws.
- Snap the back cover into place, starting from the edges and working your way around. Ensure it is aligned properly.

Congratulations! You have successfully replaced the screen of your Xiaomi Mi Mix 3 5G.

⭐Why Choose Sydney CBD Repair Centre

For a reliable and high-quality screen repair, we recommend the Sydney CBD Repair Centre. With over 1700 positive Google reviews, they have built a positive reputation for their expertise and customer service. Here are some key reasons to choose them:

1. Genuine Parts: Sydney CBD Repair Centre only uses genuine Xiaomi parts to ensure a top-notch screen replacement and preserve the device's original functionality.
2. Professional Technicians: The repair center boasts a team of skilled and experienced technicians who specialize in Xiaomi smartphone repairs.
3. Operating Hours and Contact: The Sydney CBD Repair Centre is conveniently located at Suite 201, Level 2/661 George St, Haymarket, Sydney, NSW 2000. They open Monday to Friday from 10 am to 6 pm and Saturday 10 am to 2 pm.

Booking an Appointment:
To book an appointment or for walk-in inquiries, please contact the Sydney CBD Repair Centre using the following methods:

- Phone: +61 8011 4119
- Online: Visit their website at https://www.sydneycbdrepaircentre.com.au/ for further contact options and to book online.

✈️Mail-in Repairs

For those unable to visit the repair center in person, Sydney CBD Repair Centre offers mail-in repairs. Simply contact them to arrange the details and follow their instructions for shipping the device securely.

By following this detailed guide, using genuine parts, and considering the Sydney CBD Repair Centre for your screen replacement, you can restore your Xiaomi Mi Mix 3 5G to its former glory. The Xiaomi device's fingerprint scanner will continue to function flawlessly, providing you with the same level of security and convenience as before. Trust the expertise and reputation of Sydney CBD Repair Centre for a reliable and satisfactory repair experience.

So, what are you waiting for? If you need Xiaomi Redmi Note 9T screen replacement, contact Sydney CBD Repair Centre today and get your phone fixed by the best in the industry.

mi mix 3 display price
mi mix 4
mi mix 3 disassembly
mi mix 3 battery replacement