The Google Pixel 4a 5G, smartphone that announce on September 2020 and was launched in November 2020 is a smartphone that has a solid battery life and capability. The device has a 3,885 mAh battery that can provide up to 24 hours of normal usage or up to 72 hours of extreme battery saver mode. This is an improvement over the previous Pixel 4a model, which had a smaller 3,140 mAh battery and could only last up to 10 hours of normal usage.
The Pixel 4a 5G also supports various charging options, including wired, wireless, and reverse wireless charging. The device includes an 18W USB-C power adapter that can charge the battery up to 42% in 30 minutes and up to 75% in one hour. A full charge takes about 1 hour and 40 minutes. The device also supports Qi wireless charging up to 12W, which is faster than most wireless chargers in the market. Moreover, the device can reverse wireless charge other compatible devices, such as earbuds or smartwatches, by placing them on the back of the phone.
🔧Safely Removing the Battery from a Google Pixel 4a 5G Smartphone
This guide will walk you through the process of safely removing the battery from a Google Pixel 4a 5G smartphone. Although removing the battery is not recommended for regular users, it might be necessary when replacing a faulty battery or performing advanced troubleshooting. It is crucial to take precautions and seek professional assistance if you are unsure about any step. Remember, handling the battery improperly can be hazardous. Additionally, we will provide tips on battery disposal and authorized service centers to assist with battery removal.
🛠️Materials Needed
1. Phillips-head screwdriver (preferably magnetic)
2. Plastic pry tool or guitar pick
3. Adhesive remover or isopropyl alcohol
4. Tweezers or non-conductive spudgers
5. Replacement battery (if required)
👣Step-by-Step Guide
Step 1: Safety Precautions
Prior to starting the battery removal process, observe these precautions:
- Ensure the device is powered off to avoid any potential electrical shock.
- Wear anti-static gloves and perform the procedure on an anti-static mat to prevent damage from static electricity.
- Work in a clean and well-lit area with enough space to place the removed components.
Step 2: Remove the SIM Card Tray
Using an ejector tool or a small paperclip, eject the SIM card tray located on the left side of the device. Gently insert the tool into the small hole and apply slight pressure until the tray pops out. Remove the tray and set it aside.
Step 3: Removing the Back Cover
Keep in mind that removing the back cover will void the warranty. Proceed with caution.
- Locate the two screws at the bottom edge of the device near the USB-C port.
- Using the Phillips-head screwdriver, carefully remove both screws.
- Insert a plastic pry tool or guitar pick into the seam between the metal frame and the back cover.
- Gently and carefully work the tool around the device's edges to separate the back cover from the frame.
- Be cautious not to break any plastic clips while prying open the cover.
- Once the back cover is loose, lift it away from the device, exposing the internal components.
Step 4: Disconnecting the Battery Connector
- Locate the battery connector, which is a thin flex cable attached to the mainboard.
- Carefully pry up the connector using tweezers or non-conductive spudgers.
- Lift the connector straight up from its socket and gently pull the cable away from the device to disconnect the battery.
Step 5: Removing the Battery
- Inspect the battery's attachment method. It may be secured by adhesive or held in place with screws.
- If adhesive is present, use adhesive remover or isopropyl alcohol to soften and loosen the adhesive by carefully applying it along the edges and corners of the battery. Allow a few minutes for it to work.
- If screws secure the battery, use the Phillips-head screwdriver to remove them.
- Slowly and gently lift the battery out of the device, ensuring not to bend or puncture it.
Step 6: Battery Disposal
- Batteries are considered hazardous waste and should not be thrown in regular trash.
- Contact your local waste management or recycling facility for proper battery disposal options in your area.
Step 7: Reassembling the Device
- If replacing the battery, carefully insert the new battery into the device, securing it with screws or adhesive.
- Reconnect the battery cable by pushing it straight into the connector until it is firmly seated.
- Place the back cover in position, aligning it with the device's edges.
- Apply gentle pressure along the edges to snap the plastic clips back into place.
- Finally, reinstall the two screws near the USB-C port and insert the SIM card tray.
✍️Conclusion
Removing the battery from a Google Pixel 4a 5G smartphone requires caution, as mishandling can be hazardous. We recommend seeking professional assistance if you are unsure about any step or if the device is still under warranty. Proper disposal of the battery is crucial, so please contact your local waste management or recycling facility for guidance.
How do i remove the battery from google pixel 4a 5g android
google pixel 4a 5g battery replacement
pixel 4a 5g battery replacement cost
pixel 4a battery
pixel 4a 5g battery mah
google pixel 4a battery life
pixel 4a battery replacement near me
pixel 4a 5g battery life
