Can you replace the back of a Oppo Reno5 5G?

Can you replace the back of a Oppo Reno5 5G?

The Oppo Reno5 5G, smartphone that announce on December 2020 and was launched in January 2021 has a glossy and curved design, with different colors for the back cover. The black variant has a glass back cover, which has a glossy finish and a curved edge. The blue variant has a glass back cover, which also has a glossy finish and a curved edge. The silver variant has a glass back cover, which has a special coating that changes color depending on the angle of light. All variants have the Oppo logo and the camera module on the top left corner of the back cover. The phone also has a rare cover option, which is not officially available, but some online shops offer a leather case that can be attached to the back of the phone. The leather case is available in different colors and patterns, and has a cutout for the camera module. The rare cover gives the phone a more personalized and stylish look.

The Oppo Reno5 5G is a mid-range smartphone that has a 6.43-inch AMOLED screen with a 1080 x 2400 pixel resolution and a 90Hz refresh rate. The screen is protected by Corning Gorilla Glass 5 and has a punch-hole cutout for the 32MP front-facing camera. The phone is equipped with the Qualcomm Snapdragon 765G 5G processor, which is paired with 8GB or 12GB of RAM and 128GB or 256GB of internal storage. The phone has a 4300mAh battery that can be charged up to 100% in 35 minutes with the 65W fast charger. The phone runs on Android 11 with ColorOS 12 and supports 5G connectivity. The phone has a quad camera setup on the back, which consists of a 64MP main camera, an 8MP ultrawide camera, a 2MP macro camera, and a 2MP depth camera.

๐Ÿ› ๏ธA Guide to Replacing the Back of Your Oppo Reno5 5G Smartphone: Restoring and Customizing Your Device

The Oppo Reno5 5G smartphone has gained popularity for its sleek design and advanced features. However, over time, the back of the device may suffer cosmetic damage or lose its appeal. This article aims to guide you through the process of replacing the back cover of your Oppo Reno5 5G smartphone, whether to restore its original appearance or personalize it with a different design.

๐Ÿ“ŒReasons to Replace the Back Cover

There are several reasons why someone might want to replace the back of their Oppo Reno5 5G smartphone. Firstly, cosmetic damage such as scratches, cracks, or dents can greatly affect the aesthetic appeal and resale value of the device. Secondly, replacing the back cover allows users to upgrade to a different design, showcasing their personal style and preferences.

Tools and Precautions:

Before beginning the replacement process, gather the necessary tools to ensure a smooth operation. You will need a screwdriver set (including a T5 and a T2 screwdriver head), a hairdryer or heat gun (to loosen adhesive), a microfiber cloth, and a plastic opening tool or pry tool. Additionally, make sure to work in a clean and well-lit environment, preferably on a soft surface to prevent any potential damage to the device.

๐Ÿ‘ฃStep-by-Step Instructions

1. Power Off: Begin by turning off your Oppo Reno5 5G smartphone and removing any protective case or SIM card.

2. Remove SIM Tray: Use the Ejector tool or a small paperclip to eject the SIM card tray located on the right side of the device.

3. Heat the Back Cover: Gently heat the back cover using a hairdryer or heat gun on a low setting, moving it in a circular motion about 5-6 inches away from the device. This will soften the adhesive underneath the back cover.

4. Pry Open the Back Cover: Insert a plastic opening tool or a pry tool into the gap between the back cover and the frame. Gently apply pressure in an upward motion to separate the back cover from the device. Continue this process around the edges until the back cover is fully detached.

5. Disconnect the Fingerprint Sensor Cable: Locate the fingerprint sensor cable near the bottom of the device and carefully disconnect it by gently pulling it away from the adhesive connector.

6. Remove the Rear Camera Lens: Using a T2 screwdriver head, remove the screws securing the rear camera lens. Carefully detach the lens and set it aside.

7. Remove the Motherboard Bracket: Unscrew the screws holding the motherboard bracket in place using a T5 screwdriver head. Remove the bracket and set it aside.

8. Disconnect the Battery Connector and Ribbon Cables: Slowly disconnect the battery connector and ribbon cables connected to the motherboard. Take extra care not to damage the cables during this step.

9. Lift and Remove the Battery: Gently lift the battery using a plastic opening tool or your fingers. Be cautious not to puncture or bend the battery during removal.

10. Replace with the New Back Cover: Once the old back cover is removed, replace it with the new back cover, aligning the necessary openings for the camera, fingerprint sensor, and other components.

11. Reassemble the Device: Follow steps 9 to 1 in reverse order to reassemble the device. Ensure all ribbon cables are connected securely to the motherboard, and the battery is properly seated.

Challenges and Tips:

- Adhesive: The adhesive between the back cover and the device can be quite strong. Applying heat will soften it, making it easier to pry off. Take caution not to overheat the device or use excessive force when prying to avoid damage.

- Ribbon Cables: Handling delicate ribbon cables requires extra care. Ensure you do not bend or damage them during removal or reassembly.

Availability and Limitations:

Replacement backs for Oppo Reno5 5G smartphones can be found online through e-commerce platforms or specialized smartphone repair stores. Availability may vary based on different models or regions. It is advisable to research and purchase the replacement back cover from a reputable supplier to ensure quality and compatibility.

โš ๏ธRisks and Professional Assistance

Replacing the back cover of your Oppo Reno5 5G smartphone involves some level of complexity and risks. Mishandling the device or using improper tools can cause damage, void warranties, or even pose personal harm. If you are unsure or uncomfortable with the process, it is recommended to seek professional assistance from authorized service centers or experienced technicians.

Replacing the back cover of an Oppo Reno5 5G smartphone can restore its original appearance or provide a customized look to match your style. By following the step-by-step instructions and taking necessary precautions, you can successfully replace the back cover and enjoy a refreshed device. Remember, seeking professional assistance is always an option if you are uncertain about the process or encounter any difficulties.

oppo service center repair cost
oppo reno 5 lcd replacement price
oppo service center lcd price
oppo battery replacement cost
oppo spare parts price list
oppo service center price list
Oppo reno5 5g back replacement price
Oppo reno5 5g back replacement australia

Back to blog