The Nokia 7 Plus is a smartphone that comes with a USB Type-C port that can charge your phone quickly and transfer data efficiently, smartphone that announce on February 2018 and was launched in April 2018. However, this port may not work properly for some Nokia 7 Plus users, who have faced issues such as loose connection, intermittent charging, or no charging at all.
These issues may be caused by a design flaw in the port, which makes it wider than the USB input and lacks support. This makes the USB cable unstable or disconnected from the port. If you have a Nokia 7 Plus with a faulty charging port, you have some options to fix it.
📌How to Replace the Charging Port of a Nokia 7 Plus Smartphone
Replacing the charging port of a Nokia 7 Plus smartphone may seem like a complex task, but with the right tools, precautions, and instructions, it can be done successfully. This step-by-step guide will walk you through the process, including necessary tools, precautions, potential challenges, tips and tricks for success, common mistakes to avoid, and a discussion on whether to replace the charging port yourself or seek professional assistance.
🛠️Tools Needed
1. Precision screwdriver set
2. Plastic opening tools or guitar pick
3. Tweezers
4. Heat gun or hairdryer
5. Adhesive remover or isopropyl alcohol
6. Replacement charging port (ensure it is compatible with the Nokia 7 Plus)
⚠️Precautions
1. Backup your data: Before attempting any repairs, make sure to back up your important data. This is essential to prevent any data loss during the process.
2. Power off the phone: Always ensure that your Nokia 7 Plus is turned off and disconnected from any power source before starting the repair.
3. ESD protection: Use an electrostatic discharge (ESD) mat or wear an anti-static wristband to prevent any damage from static electricity during the repair process.
4. Watch out for fragile parts: Be cautious while handling and removing delicate components like the motherboard, cables, and connectors to avoid any accidental damage.
📢Step-by-Step Guide
1. Remove the back cover:
a. Using a small plastic opening tool or a guitar pick, gently pry between the back cover and the phone's frame to detach the adhesive.
b. Work your way around the edges of the phone until the back cover is completely free.
2. Remove the battery:
a. Locate the battery connector and use a spudger or tweezers to disconnect it from the motherboard.
b. Carefully lift the battery out of the phone, applying minimal force as it may be adhered to the frame.
3. Remove the motherboard:
a. Unscrew all the screws securing the motherboard using a precision screwdriver.
b. Disconnect any cables or connectors attached to the motherboard.
c. Gently lift the motherboard out of the phone, being cautious of any cables that may still be attached.
4. Heat and remove the charging port:
a. Apply heat to the charging port area using a heat gun or hairdryer for about 1-2 minutes. This softens the adhesive holding the charging port in place.
b. Insert a plastic opening tool or a guitar pick under the charging port and gently pry upwards to loosen it from the frame.
c. Slowly and carefully lift the charging port out of the phone, ensuring no cables or connectors are still attached.
5. Clean the adhesive residue:
a. Use adhesive remover or isopropyl alcohol and a microfiber cloth or cotton swab to clean any remaining adhesive from the charging port area.
6. Install the replacement charging port:
a. Line up the new charging port with the slot in the frame and gently press it down to secure it.
b. Ensure the charging port is correctly aligned and sits flush with the frame.
7. Reassemble the phone:
a. Reconnect all cables and connectors to the motherboard.
b. Place the motherboard back into the phone and secure it with the screws.
c. Reconnect the battery and ensure it is securely attached to the motherboard.
d. Replace the back cover by aligning it with the phone's frame and firmly pressing it down to reattach the adhesive.
Tips and Tricks:
- Take pictures: Before removing any connectors or components, take pictures to document the original placement. This helps during reassembly.
- Organize screws: Use a magnetic mat or small containers to keep track of different screws and their placement.
- Be patient: Take your time during each step to avoid rushing and making any mistakes.
- Double-check connections: Before closing the phone, ensure all cables and connectors are properly seated and secured.
Common Mistakes to Avoid:
- Using excessive force: Apply gentle pressure throughout the repair process to avoid damaging delicate components.
- Ignoring ESD protection: Static electricity can cause irreversible damage to your phone. Always use proper ESD protection to avoid this.
- Rushing the process: Take your time and follow each step carefully to prevent any avoidable errors or accidents.
Replacing the Charging Port: DIY vs. Professional Assistance
DIY Pros:
- Cost-effective: Doing the repair yourself can save money compared to taking it to a professional technician.
- Flexibility: You can repair the charging port at your convenience, without having to wait for an appointment or shop opening hours.
DIY Cons:
- Potential risks: If not done accurately, DIY repairs can cause further damage to the phone and void any existing warranty.
- Skill and knowledge required: Replacing a charging port can be challenging for inexperienced users, increasing the likelihood of errors or accidents.
Professional Assistance Pros:
- Expertise: Professional technicians have the necessary skills, knowledge, and experience to safely replace the charging port without damaging the phone.
- Warranty protection: Repairing the phone with a certified technician ensures that any existing warranty remains intact.
Professional Assistance Cons:
- Higher cost: Professional repairs can be more expensive than DIY repairs.
Deciding whether to replace the charging port of your Nokia 7 plus by yourself or seek professional assistance ultimately depends on your level of confidence, experience, and the availability of professional services. If you are unsure of your abilities or want to avoid potential risks, it may be best to seek professional assistance. However, if you are experienced with smartphone repairs and confident in your skills, you can save money by successfully replacing the charging port yourself.
Can i replace my own nokia 7 plus charging port after
nokia 7 plus charging port price
nokia 7 plus charging port issue
nokia 7 plus charging ways
nokia 7 plus charging jack
nokia 7 plus charging board
nokia 7 plus charging problem
nokia 7 plus disassembly
