The Huawei P20 is a smartphone that was released in March 2018. It has a 5.8-inch IPS LCD display with a notch and a resolution of 1080 x 2240 pixels. It runs on Android 8.1 Oreo with EMUI 8.1 and has a Kirin 970 chipset with 4GB or 6GB of RAM and 64GB or 128GB of internal storage, which cannot be expanded. It has a dual rear camera system with Leica optics, which consists of a 12MP main camera and a 20MP monochrome camera, both with f/1.6 aperture. It also has a 24MP front-facing camera with f/2.0 aperture.
It has a 3400mAh battery with Huawei SuperCharge technology, a fingerprint scanner on the front, face recognition, Dolby Atmos audio, NFC, infrared and USB Type-C port. It is available in black, blue and twilight (gradient) colors and has an IP53 rating for water and dust resistance.
📌How to Remove the Screen of a Huawei P20 Smartphone
The Huawei P20 is a smartphone that has a 5.8-inch LCD screen with a resolution of 1080 x 2244 pixels and a notch. The screen is attached to the frame with strong adhesive, which makes it hard to remove without damaging it. If you want to remove the screen of your Huawei P20, you will need some tools and patience.
🏷️In this step-by-step tutorial
We will guide you through the process of safely and effectively removing the screen of your Huawei P20 smartphone. It's essential to carefully follow each step to avoid damaging any components during disassembly. Make sure to read through all the instructions and look at the provided visuals before beginning the process.
1. Small Phillips screwdriver
2. Plastic spudger or prying tool
4. Adhesive remover or isopropyl alcohol
5. Microfiber cloth
6. Safety glasses (optional)
1. Ensure your device is powered off before beginning.
2. Take appropriate safety measures, like wearing safety glasses, if you prefer.
3. Use gentle pressure and take your time during the disassembly process to avoid any accidental slips or damages.
4. Keep track of the screws and small components by using a magnetic mat or compartments.
Step 1: Power Off the Huawei P20
Before starting the disassembly process, ensure your Huawei P20 smartphone is powered off.
Step 2: Remove the SIM Card Tray
Use a SIM card eject tool or a small paperclip to push into the small hole located on the side of the device. Apply gentle pressure to eject the SIM card tray.
Step 3: Remove Back Cover
Using a plastic spudger or prying tool, insert it gently into the seam between the back cover and the main body of the phone. Apply light pressure and carefully work your way around the edges until the back cover starts to detach. Be cautious and take your time to avoid damaging the plastic clips.
Step 4: Remove the Battery (Optional)
If you wish to remove the battery for any reason, locate the battery connector, which is a flat ribbon cable connected to the motherboard. Gently disconnect it from its socket using a plastic spudger or tweezers. However, it is not necessary to remove the battery to replace the screen.
Step 5: Remove Screws Securing the Screen
Once the back cover is removed, you'll find several small screws securing the screen to the body. Use a small Phillips screwdriver to carefully remove all the screws. Take note of their placements, as some may be different sizes.
Step 6: Soften the Adhesive
Apply a small amount of adhesive remover or isopropyl alcohol around the edges of the screen using a cotton swab or a similar tool. This will help loosen the adhesive holding the screen in place. Make sure to avoid dripping any liquid into the device.
Step 7: Detach Connectors
Gently lift the screen from the bottom corner, creating a slight gap. Take a plastic spudger or prying tool and insert it into the gap. Carefully slide the tool around the edges, using gentle but firm pressure to loosen the adhesive further. As you go, detach the connectors that link the screen to the motherboard using a spudger or tweezers. These connectors may be ribbon cables or small clips that need to be carefully unhooked.
Step 8: Lift and Remove the Screen
Continue to loosen the adhesive by carefully maneuvering the prying tool around the edges until the screen is detached from the main body. Take your time and ensure all connectors are unhooked. Once the screen is entirely free, gently lift and remove it from the device.
Step 9: Clean and Prepare Replacement Screen
Before installing a new screen or conducting any repairs, thoroughly clean the display area using a microfiber cloth and isopropyl alcohol. This will remove any debris or remaining adhesive.
Congratulations! You have successfully removed the screen of your Huawei P20 smartphone!
Remember to follow any necessary additional steps for screen replacement or repairs, and refer to the manufacturer's instructions or a professional technician if needed.
huawei p20 screen replacement price
huawei p20 pro screen replacement
huawei p20 lite screen replacement price
huawei screen replacement price
huawei p20 pro screen replacement price
huawei p20 screen protector
huawei p20 screen replacement near me
how to fix huawei screen