Can you replace the back of a Huawei Mate 30 Pro?

Can you replace the back of a Huawei Mate 30 Pro?

The Huawei Mate 30 Pro is one of the most advanced smartphones that Huawei launched in 2019. The back of the phone is also made of glass and features a unique circular design for the four cameras: a 40 MP main camera, a 40 MP ultra-wide camera, an 8 MP telephoto camera, and a 3D depth sensor. The back cover supports wireless charging and reverse wireless charging, and comes in four different colors: Black, Space Silver, Cosmic Purple, Emerald Green. It boasts a stunning 6.53-inch OLED screen that curves around the edges and offers a high resolution of 1176 x 2400 pixels.

The Huawei Mate 30 Pro has a powerful performance thanks to the Kirin 990 chipset, which is a 7 nm octa-core processor with a Mali-G76 MP16 GPU. It has 8 GB of RAM and 128 GB or 256 GB of internal storage, which can be expanded with a Nano Memory card. The phone runs on Android 10 with EMUI 11, but it does not have Google Play Services due to the US-China trade war. The phone has a large 4500 mAh battery that supports 40 W wired fast charging and 27 W wireless fast charging. The phone also has a fingerprint sensor under the display, face recognition, an infrared port, NFC, and a USB Type-C port. The phone does not have a 3.5 mm headphone jack, but it has a 32-bit/384kHz audio output.

πŸ‘£A Step-by-Step Guide to Replacing the Back Panel of a Huawei Mate 30 Pro Smartphone

Accidents happen, and one common mishap smartphone users encounter is a cracked or damaged back panel. However, with a little guidance and the right tools, you can successfully replace the back of your Huawei Mate 30 Pro smartphone. This comprehensive guide will walk you through the necessary steps, precautions, and tools required for a successful replacement. We will also highlight potential challenges that may arise during the process and recommend seeking professional assistance if needed.

πŸ› οΈTools Required

1. Replacement back panel: Acquire a genuine replacement back panel suitable for the Huawei Mate 30 Pro.
2. Screwdriver kit: Obtain a set of precision screwdrivers, including a Pentalobe screwdriver, Phillips screwdriver, and plastic prying tools.
3. Heat source: A heat gun or hairdryer will be necessary to soften the adhesive securing the back panel.
4. Tweezers: Use tweezers to handle small components and wires delicately during the replacement process.
5. Plastic opening tools: These help in prying open the device without causing damage.
6. Isopropyl alcohol and microfiber cloth: These will clean the internal components and remove any adhesive residue.

βš™οΈStep-by-Step Guide

1. Power down your Huawei Mate 30 Pro: Ensure your phone is turned off before starting the replacement process.

2. Remove the SIM tray: Use a SIM ejector tool or a paperclip to gently eject the SIM tray located on the side of the device.

3. Heating and separating the back panel: Use a heat gun or hairdryer set on low heat to warm up the back panel for approximately one to two minutes. Ensure that the heat is evenly distributed to soften the adhesive. Then, insert a plastic opening tool between the back panel and the side frame and gently pry it open. Repeat this process on all sides until the back panel is completely separated.

4. Disconnecting the connectors: Carefully disconnect the battery connector and other internal connectors. Use tweezers or a spudger tool to release the connectors by gently prying them up.

5. Removal of the back panel: Once the connectors are detached, you can now lift the back panel away from the smartphone. Be cautious of any adhesive or clips that might still be attached.

6. Installing the new back panel: Align the new back panel with the smartphone and affix it securely. Ensure it sits flush with the side frame. Apply gentle pressure to snap it into place.

7. Reconnecting the internal components: Reattach the connectors, ensuring they are in their original positions. Gently push them down until they click back into place. Take care not to force any connectors or bend the cables.

8. Testing the replacement: Before reassembling the device, it is essential to power it on and verify that everything is working correctly. Test the screen, touch functionality, camera, and other features.

⚠️Precautions and Potential Challenges

1. Adhesive residue: During the separation process, leftover adhesive can make it difficult to detach the back panel. Use isopropyl alcohol and a microfiber cloth to clean any stubborn adhesive residue.

2. Fragile internal components: The internal components of the Huawei Mate 30 Pro are delicate, so exercise caution when prying open the device or handling small connectors and cables.

3. Heat exposure: While heating the back panel is necessary for separating it, excessive heat application can damage the device's internal components. Avoid overheating the smartphone by using a heat gun or hairdryer at a safe distance and on low heat settings.

Seeking Professional Assistance:

If you're not confident in your ability to replace the back panel or encounter any issues during the process, it is best to seek professional assistance. A certified technician at a Huawei service center or a qualified phone repair shop will have the expertise and experience to handle the replacement safely.

Replacing the back panel of a Huawei Mate 30 Pro smartphone can be a straightforward process when approached with caution and the right tools. Following the steps outlined in this guide, exercising carefulness, and being aware of potential challenges will help you successfully restore your device's appearance. Remember, if you have any doubts, it is always wise to reach out to a professional for assistance.

Can you replace the back of a huawei mate 30 pro price
Huawei mate 30 pro back replacement price
Can you replace the back of a mate 30 pro huawei
Huawei mate 30 pro back replacement australia

Back to blog